Components

Round BCD110x4 chainrings compatible with all ROTOR cranks using BCD110x4 spider or INspider power meter. In addition, these chainrings are also ...

Compatible with SRAM 11s 50-34 ("compact"): If you ride a lot in the mountains. 52-36 ("semi-compact"): A great all-round combination – a customer ...

This is for the Aldhu 24 crank and this is for the non drive side.  

Rotor round chainrings that are SRAM 12s AXS compatible 48/35t for Shimano 4-bolt spiders/powermeters.

A set of 2 in black for the 30mm axle

These are the O rings that are needing for the 24mm axle Rotor crank setups. One on each side between BB and crank arm.

Rotor 3D Non-Drive Side alloy Bolt Grey. This is for Rotor 3D cranks 24mm axle.

There's nothing worse than setting up your shiny-new crankset on your bike and finding gaps, spaces, and wobbles. To solve the problem before your ...

You think that your bike's performance features could be enhanced with components selected á la carte at your local bike shop — and that you should...

You had your choice of any bike in the shop but you made your selection based on potential upgrade options. The Press Fit 4124 will easily accommod...

Two spacer sets to fit all standard BB shells. The ROTOR spacers are manufactured in Aluminum 7075 and allow the cranks to be centered and adjusted...

The pictures shows the cups as well which are not included. This is just the middle sleeve part that can be needed to make sure cables do not touch...

ROTOR PF4624 BB386 BB Steel features:   Weight  137g  Material  100% CNC-machined, 7075 aluminum. Labyrinth seals prevent bearing contaminat...

These are the Rotor covers to close the gap between chain rings and a Dura Ace 9200 crank

ROTOR Road/Gravel Axle 24 mm. ROTOR axle 24 mm axle features a cleverly designed spline interface when mounted to the spider or Direct Mount ch...

ROTOR Road/Gravel Axle 30 mm. ROTOR axle 30mm axle features a cleverly designed spline interface when mounted to the spider or Direct Mount chain...

These 110x4 Oval Chainrings were created in order to accomplish uncompromising compatibility without sacrificing performance. Designed to be 11 a...

The classic CX gear ratio. BCD: 110 mm Sizes: Outer - 46t, Inner - 36 Weight: 132g per set 46/34 Technologies: Alu7075, CNC, TryQ Compatibility: D...

ROTOR T47 24mm threaded bottom brackets are the new addition to our 2021 lineup. This bottom bracket fits any frame with a standard T47 bb shell, w...

BB30 to BB24 converter which allows the installation of conventional BB24 cranks with 24mm axle in BB30 frames. New, advanced non-contact labyrinth...

Rotors Self Aligning Bottom Bracket short SABB is self explaning. It is the ceramic version for threaded BBs and will work with a 24mm axle.

A set of of the silicone seal for the 24mm axle setup.

4 3mm spacers for 30mm spindle